BIGTREETEHCH TFT35 E3 V3.0.1 Touch Screen Display with Two Working Modes Compatible 12864 LCD Display WiFi for Ender 3 CR-10 SKR MINI E3 V3.0/SKR V1.4 Turbo Octopus V1.1 SKR 3 3D Printer Control Board

For more details about TFT35 E3 V3.0.1 Display: Please search BIGTREETECH at GitHub. ※BIGTREETECH TFT35-E3 V3.0 .1is a medium size, dual-mode, ultra-clear 3D printing machine display launched by the 3D printing team of Shenzhen BIGTREE Technology CO., LTD., which can perfectly replace the original LCD screen of Ender3 printer. ※1.Product characters ： 1）ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; 2）Upgrade the firmware by SD card. It is easy and convenient to operate. 3）This display board has higher compatibility. Users can select two work modes: UART serial port screen mode and 12864 screen mode. 4）Serial port screen mode supports two printing modes: SD card and U disk. 5）Reserve WIFI port, and WIFI function is realized by external WIFI module； 6）LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used by E3 series motherboard (such as SKR MINI E3 V1.2, SKR E3 DIP V1.1, etc.) ； 7）TFT touch screen mode：serial port screen RS232 port； 8）2 sets of UART serial port extension ports are reserved for DIY use. ※2.Product Parameters ： Appearance size：93*87mm Installation size：Perfectly replace the original LCD screen of Ender3 printer， detail information please check TFT35-E3 V3.0.1 SIZE Microprocessor：STM32F207VCT6 Power Input：DC 5V SD card logic voltage：3.3V and 5V（Such as: support MEGA2560 main control chip motherboard, higher compatibility) Notes： 1. When using 12864 screen mode, connect the port EXP1 and EXP2 to the motherboard. There is no touch function in this mode. 2. When using serial port screen mode, connect with TFT or AUX-1 on the motherboard via RS232. This mode has touch function； 3. Two work modes can be changed by one key. Press the encoder about 3seconds until the mode selection page appears, then press the encoder after selecting the mode.

• Main Control Chip: BIGTREETECH TFT35 E3 V3.0.1 touch screen display adopts ARM Cortex-M3 series GD32F205VCT6 master controller with 32-bit main frequency of 120MHz, it is designed for ENDER 3 3d printer especially, which can perfectly replace the original LCD screen of Ender 3 Printer. When running Klipper, only support 12864 mode. If want to touchscreen, can choose HDMI5 V1.2 Klipper touchscreen.
• Dual Modes: BTT TFT35-e3 v3.0 display touch screen two working modes, support UART serial port screen mode and 12864 screen mode support two printing Modes：SD Card and U disk with one catering the Marlin-style interface, and the other offering a full colour touch interface with the option to switch between them within seconds while the machine is running.
• Multi function expansion interface: BIGTREETECH TFT35 E3 V3.0.1 is a 3D printer upgrade that offers both SD card and USB functionality, reserve the extension port of filament breaking detection,automatic shutdown after printing，WIFI function can be realized by external WIFI module through WIFI port.
• Wide Compatiblity: Not only is this BTT TFT35 E3 V3.0.1 smart display compatible with Ender series printers,but can also be used on a host of other 3D Printers too, as long as you are willing to print your own enclosure for other display panel styles,compatible with SKR MINI E3 V3.0/SKR MINI E3 V2.0/Octopus/SKR V1.4 Turbo/SKR 3/SKR 3 EZ/SKR Pro V1.2 etc motherboard
• Satisfying After-sales Services: If you have any questions regarding Bigtreetech TFT35-E3 V3.0.1 touch screeen, please writer to us on Amazon. Our technical supports team will help you solve it