Paintless Dent Repair Tools 1 Pieces of Dent Removal Rods with Awl Head Dent Hail Repair Tools Paintless Dent Removal Kit Car Auto Body Dent Removal of Hail Dents and Door Ding (17 PCS)

Product includes: 1 PCS black Dent removal rods with different sizes（R1) 16PCS Awl head（11 plastic repair heads and 5 stainless steel repair heads） How to use the Dent Removal Rods： 1. First, use mild soapy water and a clean cloth to thoroughly clean the dent and the surrounding body panel. Ensure all dust, debris, and grease are removed to allow for clear visualization of the dent and unobstructed tool access. After cleaning, dry the area completely. 2. Carefully inspect the size, depth, and location of the dent. Select an appropriate head based on the location of the depression and the structure of the car body. For example, for dents on the inner side of the door, a head of moderate length and a finer head might be chosen to allow more precise access into tight spaces 3. If repairing from the inside of the body panel, place the head of the rod steadily against a suitable point beneath the depression. Simultaneously, place a piece of soft padding (such as a rubber pad or thick cloth pad) on the external corresponding area of the car body to prevent scratching the paint when applying force with the rod 4. Apply an even, slow upward force to gradually lift the depression. Avoid using excessive force or sudden jerks, as this can overstretch the metal or cause further damage to the paint. Proceed patiently and incrementally. 5. Frequently check the progress of the dent repair from different angles. Adjust the position or angle of the rod as needed, or switch to head with different shapes or sizes to ensure the dent is being lifted evenly. 6. After the majority of the dent has been lifted, fine-tuning may be necessary. At this stage, a rubber mallet can be used to gently tap around the depression to help adjust the levelness of the area

• The diameter of the hook is 12mm and durable enough to push up the dent without bending or breaking. Corrosion resistance steel of our dent removal rods won’t rust and keep bright finish all the time.
• The Rods Come with 16 awl Heads including 11 plastic repair heads and 5 stainless steel repair heads， You can Select the appropriate awl head according to the size of the dents or bends , the 11 awl is made of rubber, will not harm the original paint on the body surface.
• Paintless dent repair hook can be used repeatedly until satisfactory results are achieved, that are more reasonable and cheaper than car repaired in auto repair shops
• All of our products have been carefully inspected before shipment to ensure its quality and completeness.We also accept refund in case of any dissatisfaction occurs.
• Utilize a high-reflectivity light board to illuminate the vehicle surface. By observing light distortion patterns, precisely locate dented areas. Select a specialized head that matches the contour of the dent, then apply gradual pressure from the inner side of the panel to slowly push out the depression. Finally, use a rubber hammer for fine-tuning and leveling to achieve a seamless repair.